About the Wet Sounds REVO 10 FA S4 V3

Product highlights:
- black 10" 4-ohm marine subwoofer for free air applications
- injection-molded composite cone with Santoprene rubber surround
- rugged black Nylas composite frame
- stainless steel terminals
- marine-grade Santoprene rubber spider
- grille sold separately
Specifications:
- handles up to 300 watts RMS (600 watts peak)
- frequency response: 20-200 Hz
- sensitivity: 85 dB
- mounting depth: 4.62"
- cutout diameter: 9.46"
- weight: 14 lbs.
- warranty: 2 years
- MFR # REVO 10 FA S4 V3
- Item # 867R10F4V3
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
Wet Sounds REVO 10 FA S4 V3 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- One 10" Marine subwoofer
- Six 1-1/2" Stainless steel screws
- Owner's manual
- Template
More details on the Wet Sounds REVO 10 FA S4 V3

Features & specs
Features and Specs | ||
---|---|---|
Size | 10-inch | |
Impedance (Ohms) | 4 | |
Cone Material | Injection Molded Composite Poly | |
Surround Material | Santoprene Rubber | |
Basket Material | Nylas | |
Grille | None included | |
Free-Air | Yes | |
Dual Voice Coil | No | |
Sensitivity |
85 dB at 1 watt | |
Frequency Response | 20 - 200 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 600 | |
Top Mount Depth (inches) | 4 5/8 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/2 | |
Frame Width | 10.621 | |
Frame Length | 10.621 | |
Vas (liters) | 21.6 | |
Fs (Hz) | 45 | |
Qts | 0.58 | |
Xmax (millimeters) | 11 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.3 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A |
Product Research
Features
Nylas Basket: The speaker frame is made of Nylas, a composite mix of Nylon and Fiberglass, providing strength and stability.
Rubber Spider: Durability is further improved by the Santoprene rubber spider Wet Sounds developed for their marine speakers.
Terminals: The set screw terminals offer easy connection of bare wire up to 12 gauge. A 2.5mm Allen wrench (not included) is needed to tighten the terminals. (Even though there is only one voice coil, there are two positive and two negative terminals shorted together, making it easy to wire a second sub in parallel.)
Infinite-Baffle Operation: The sub is optimized for infinite baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure. If mounted in an enclosure, Wet Sounds recommends 1.3 ft³ sealed.
The Wet Sounds REVO 10 FA S4 V3 replaces these items:

Wet Sounds REVO 10 FA S4-B V2
- injection-molded composite cone with rubber surround
- grille sold separately
- handles up to 300 watts RMS (600 watts peak)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Awesome speaker and hits really hard, don't trust the drill template just make your own.
Mark from Marble Falls, TX