About the Wet Sounds REVO 6 XS-S V3

Product highlights:
- 2-way 6-1/2" marine speakers (pair)
- variable-color RGB LED backlight
- unlimited colors with RGB controller (not included)
- composite cone woofer with Santoprene rubber surround
- 1" titanium tweeter
- rugged Nylas™ (nylon/fiberglass) frame
Specs:
- handles up to 100 watts RMS (200 watts peak)
- frequency response: 40-20,000 Hz
- sensitivity: 90 dB
- impedance: 4 ohms
- cutout diameter: 5"
- frame diameter: 6.888"
- top-mount depth: 3.375"
- warranty: 2 years
- MFR # REVO 6 XS-S V3
- Item # 867R6XSSV3
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
Wet Sounds REVO 6 XS-S V3 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two 2-way marine speakers with attached grilles
- 2 Rubber mounting gaskets
- Two 8" Waterproof 2-pin female SuperSeal speaker harnesses
- Two 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- Eight 1-1/4" Stainless steel Phillips head screws
- Owner's manual
- 2 Templates
More details on the Wet Sounds REVO 6 XS-S V3

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Tweeter Composition | Titanium | |
Woofer Composition | Injection-Molded Composite | |
Woofer Surround | Santoprene Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity |
90 dB at 1 watt | |
Frequency Response | 40 - 20k Hz | |
Max RMS Power Handling | 100 | |
Peak Power Handling (Watts) | 200 | |
Impedance (Ohms) | 4 | |
Top-mount Depth (Inches) | 3 3/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Bolt Circle | 6.157 |
Product Research
Features
Marine Rated: The REVO 6 V3 is a state-of-the-art marine speaker by Wet Sounds that is designed to provide great reproduction of sound for your marine or off-road audio system.
2-Way Coaxial Driver Design: The REVO 6 V3 uses a coaxial 2-way driver design featuring a 1" titanium dome tweeter and 6.5" injection-molded composite cone woofer with santoprene rubber surround for high output sound. The high-output 1" titanium dome tweeter is mounted on the grill, which keeps the mid woofer sealed eliminating any chance of water intrusion through the pole piece as common on many marine coaxial speaker systems.
Nylas Basket & Rubber Spider: The REVO 6 V3 speaker employs a Nylas basket, which is a composite mix of nylon and fiberglass, providing improved marine stability and strength over conventional materials used in many marine speakers. Wet Sounds has also developed a rubber spider that is built to last much longer than the traditional cotton spiders found an many of today's marine speakers.
RGB LED Lighting: There are red, green, and blue LEDs in the back of the tweeter casing, to create a glow on the woofer cone. The LEDs can be powered individually, or in any combination you like. A 12 volt power supply is needed to turn the LEDs on and a 2-amp fuse should be added in-line (fuse not included). The LEDs can also be controlled using Wet Sounds' wireless RGB Music Controller remote (item number 867RFRGBMC, sold separately). A male 4-pin waterproof SuperSeal plug is on the wire connected to the LED housing, which connects to the included female SuperSeal harnesses.
Speaker Terminals: Similar to the LED wiring, a male 2-pin waterproof SuperSeal plug is on the signal input wire, which connects to the included female SuperSeal harnesses.
Fixed Grilles: The grilles are fixed and not removable.
The Wet Sounds REVO 6 XS-S V3 replaces these items:

Wet Sounds REVO 6-XSS
- variable-color RGB LED backlight
- 8 grille styles to choose from
- handles up to 100 watts RMS (200 watts peak)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Speakers are very nice with a deep sound from the weight and strong construction. Like them way above average. LEDs show nice against white of rv but having trouble pairing remote to controller
Bob from Westborough, MA