Contact us
Close contact box
Connect ID #
899 118 857 4
Connect ID #
899 118 857 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Video: setting your amp's gain control

Properly set gain prevents distortion and reduces noise

Check out our quick and easy method for properly setting the gain on your car amplifier. This simple adjustment will have you on the road to stellar sound.

Read video transcript

Properly setting the gain on your amplifier is key to getting great sound in your car. The gain control is not for adjusting volume. It simply adjusts the amount of signal coming from your receiver into the amplifier.

If you set it too high, you're introducing distortion into the sound. But if you set it too low then you're choking back on what the amp is there to do in the first place. So the key is finding the right balancing point for your car.

Every manufacturer is a little different in how they design their amps, so be sure and check your owner's manual to see what they recommend. We're going to show you a technique that works pretty well with any amplifier.

First turn the amp's gain all the way down. Then go up front and put on some music. Now crank the stereo's volume until you hear distortion. Then back it off until the distortion goes away. Now go to the back again and turn up the amp's gain until that distortion comes back. Then, once again, back off until the distortion's gone. You're done.

If you're using the amp to power your speakers, everything should be clear and strong. If you're powering a subwoofer, then as you turn it up that sub should continue hitting hard and tight and the bass should be well-defined.

  • Kent Murphy from Harrisburg

    Posted on 7/31/2022

    This is very good advice customers. This is a simple way of setting-up the gain with an off-board amp from the head unit. This method helped me get close to the sweet spot. Fine tuning now. Nice work Crutchfield.

  • edson from suriname

    Posted on 3/14/2019

    hello.i was wondering should i leave loudness on or off?

    Commenter image

    Buck Pomerantz from Crutchfield

    on 3/15/2019

    Edson, The loudness setting boosts the high and low frequencies of low-level playback to compensate for our ears' lack of sensitivity to quiet sounds. The answer to your question is: whichever way sounds better to you.
  • Commenter image

    Buck Pomerantz from Crutchfield

    Posted on 7/25/2016

    Martin, It sure does look like that bass is fully boosted, which probably wouldn't sound so good or make setting the amp gain any easier. Fortunately this is a demonstration video and the amp was not in someone's car. An amp's gain should be set with all EQs and boosts set as you would normally listen to music. Applying bass boost after setting the gain, for example, will result in clipping.

  • Martin from Nixa mo

    Posted on 7/23/2016

    Not sure but it looked like in this video that the bass boost knob was all the way up. Should this setting be at zero when adjusting the gain ?

Looking for
car amplifiers?

Car Amplifiers Shop our selection

Find what Fits your vehicle


Checking fit...

Compare the sound