About the Kenwood Excelon XR-W1204
Kenwood puts their most advanced technology into the Excelon subwoofers, so you can enjoy reliable high-performance bass in your ride. The oversized XR-W1204 12" sub is designed to move more air than a standard sub, which means more sound in your vehicle. It comes equipped with an oversized polypropylene cone attached to a heavy-duty rubber surround that allows for extra excursion, so it'll faithfully reproduce those low notes. The XR-W1204 is rated to handle up to 400 watts RMS so you know it's ready to rock.
Keeping it cool
A dual ventilation system forces heated air out of the motor structure through the back and the sides of the housing, so the sub stays cooler during extended play. This ventilation system also allows this sub to operate in a shallow enclosure, good news if you're building a box to go in a tight spot. Install this Kenwood in a suitable box, hook up a nice amp, and you're ready to rumble.
- 12" 4-ohm component subwoofer
- oversized polypropylene cone with rubber surround
- power handling: 400 watts RMS (2000 watts peak)
- frequency response: 32-300 Hz
- sensitivity: 83 dB
- top mount depth: 5-5/8"
- grille not included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # XR-W1204
What's in the box:
Kenwood Excelon XR-W1204 owner's manual
- One 12" Subwoofer
- Eight 1-3/8" Screws
- Adhesive backed foam gasket
- Cardboard template
- Instruction manual (English/ French/ Spanish/ Portuguese)
- Warranty information
- Specs on box lid
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Kenwood Excelon XR-W1204 reviews
Thanks for submitting your review
This review was collected as part of a promotion
More details on the Kenwood Excelon XR-W1204
Features & specs
|Ideal Sealed Box Volume (cubic feet)||0.88|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
83 dB at 1 watt |
|Frequency Response||32 - 300 Hz|
|Max RMS Power Handling||400|
|Peak Power Handling (Watts)||2000|
|Top Mount Depth (inches)||5 5/8|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||10 15/16|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Sealed Enclosure Applications: Kenwood recommends sealed enclosure volumes from 0.6 ft³ to 1.25 ft³, with an optimum volume of 0.88 ft³. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music.
Ported Enclosure Applications: Kenwood recommends ported enclosure volumes from 1.2 ft³ to 2.0 ft³. The optimum volume is 1.5 ft³ with a 12-3/4" wide x 1-3/8" tall x 29" long slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output.
Spring Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 8 gauge.
- Frame: the speaker frame doesn't have a uniform diameter; at the widest points the diameter is 14.665", at the narrow points it's 12.821"
- Woofer Displacement: 0.098 ft³ (2.8 liters)
1 question already asked
Have two of these in a standard cab truck box, paired with a Kenwood KAC9106D amp, they sound fantastic! Nice lows and hit hard, had to turn the amp down a bit, lotta bass in a small cab! Would buy again.
Joe from Clarksville, OH