About the Rockford Fosgate P3D4-10
Standout performance
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.
Designed for deeper, louder bass
Rockford Fosgate designed the P3D4-10 10" subwoofer to stay strong even when the bass gets hot. This Punch P3 sub features a rigid anodized aluminum cone that holds its shape through heavy play, while staying light and responsive. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
Heat-sink cone
The aluminum cone acts as a giant heat sink, directing heat away from the copper-clad aluminum voice coils. Special venting keeps the voice coils cool, so you get incredibly consistent bass performance over time. This P3 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it'll hit deeper lows without "bottoming out."
The dual 4-ohm voice coils allow you to wire the sub for 2-ohm impedance to get maximum power output, or for 8-ohm impedance if you're using multiple subs. The P3D4-10 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
Subwoofer Wiring Diagrams
To see sample wiring diagrams for all common subwoofer/amplifier combinations, check out this informative article.
Product highlights:
- 10" subwoofer with dual 4-ohm voice coils
- anodized aluminum cone with Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST™) increases cone area
- power range: 250-500 watts RMS (1000 watts peak power)
- frequency response: 28-250 Hz
- sensitivity: 82 dB
- top-mount depth: 6-3/16"
- sealed box volume: 0.5-0.75 cubic feet
- ported box volume: 1.4 cubic feet
- grille not included
- warranty: 1 year
- MFR # P3D4-10
What's in the box:
Rockford Fosgate P3D4-10 owner's manual
- One 10" Dual 4-ohm voice coil subwoofer
- Trim ring
- Twelve 1-1/8" Allen head screws
- 4mm Allen head bit
- Installation/Operation manual (English/ French/ Spanish/ German)
Customer reviews for Rockford Fosgate P3D4-10
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate P3D4-10
Features & specs
| Features and Specs | ||
|---|---|---|
| Size | 10 -inch | |
| Impedance (Ohms) | 2, 8 | |
| Cone Material | Anodized Aluminum | |
| Surround Material | Santoprene | |
| Port diameter (inches) | 4 | |
| Port length (inches) | 14 | |
| Free-Air | No | |
| Dual Voice Coil | Yes | |
| Sensitivity |
82 dB at 1 watt | |
| Frequency Response | 28 - 250 Hz | |
| Max RMS Power Handling | 500 | |
| Peak Power Handling (Watts) | 1000 | |
| Top Mount Depth (inches) | 6 3/16 | |
| Bottom Mount Depth (inches) | N/A | |
| Cutout Diameter or Length (inches) | 9 | |
| Vas (liters) | 27 | |
| Fs (Hz) | 28 | |
| Qts | 0.56 | |
| Xmax (millimeters) | 13.9 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Box Requirements | ||
| Ideal Sealed Box Volume (cubic feet) | 0.59 | |
| Minimum Sealed Box Volume (cubic feet) | 0.5 | |
| Maximum Sealed Box Volume (cubic feet) | 0.76 | |
| Ideal Ported Box Volume (cubic feet) | 1.4 | |
| Minimum Ported Box Volume (cubic feet) | N/A | |
| Maximum Ported Box Volume (cubic feet) | N/A | |
Product Research
Features
Enclosure Compatibility
Features
Overview: The Rockford Fosgate Punch P3D4-10 is a 10-inch subwoofer with dual 4Ω voice coils. The sub features a hybrid StampCast basket, quick-release compression terminals, anodized aluminum cone, and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Dual 4Ω Voice Coils: The dual 4Ω voice coils offer wiring flexibility; when wired in parallel the woofer presents a 2Ω load, when wired in series the woofer presents an 8Ω load.
Compression Terminals: The P3D4-10 features spring post terminals which accommodate pin connectors, single banana plugs, or bare speaker wire up to 10 gauge.
CEA-2031 Compliant: Power handling on the P3D4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Trim Ring: To improve the cosmetic look, a decorative trim ring is included that mounts over the flange of the woofer. When using the cast aluminum trim ring the woofer is first mounted with four screws, then the ring is placed on top of the woofer, aligning the final four holes of the woofer with ring. The other four screws are used for these holes to mount the ring and woofer to the enclosure. Without the trim ring the mounting height of the woofer is just under an inch, with the trim ring it's approximately 1-1/16 inches. The diameter of the trim ring is approximately 11-1/4 inches.
Enclosure Compatibility
Sealed Box: Rockford recommends a sealed enclosure with an optimum internal volume of 0.59 cubic feet (from 0.5 to 0.75 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: Rockford recommends a ported enclosure with an internal volume of 1.4 cubic feet using one 4" diameter x 14" long port; this yields a tuning frequency of 40 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output (below 31 Hz).
The Rockford Fosgate P3D4-10 replaces these items
Rockford Fosgate P3SD410
- Dual 4-ohm voice coils
- fiber cone reinforced with Kevlar® with poly-ether-ester surround
- 100-300 watts RMS power range
Rockford Fosgate P3D410
- Dual 4-ohm voice coils
- fiber cone reinforced with Kevlar® with poly-ether-ester surround
- 50-400 watts RMS power range
Rockford Fosgate T110D4
- Dual 4-ohm voice coils
- aluminum parabolic cone with rubber surround
- 150-600 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
18 questions already asked
Loading...
Loading articles...
I now have two of these bad boys in a Mini Cooper Clubman.. Seriously the best thing I could of bought for it. Passengers that ride in the back seat always thank me for the free back massage they get from the subs haha. Definitely a great product.
Brandon from Windsor, Va